The annual output of 10,000 tons of organic fertilizer npk fertilizer manufacturing process is generally composed of drying system, deodorization and dust removal system, special grinder for organic fertilizer, batching system, mixing system, special granulator for organic fertilizer and finished product packaging machine.
Generally, there will be vibration when the npk fertilizer production line is used, and the reason for the vibration is mostly because the equipment is running unstable. After starting the machine, the large shaft becomes loose, which causes the hammer head to swing without a fixed balance point, resulting in the overall equipment. Shaking; and if the weight of each set of hammer heads is different, there will also be vibration; these situations should be dealt with in time after discovery.
Countermeasures to reduce the failure of organic fertilizer equipment:
(1) Maintain the initial and basic state of the organic fertilizer equipment and maintain the original design parameters: this is the most basic work, that is to say, the first step to reduce the failure of the organic fertilizer equipment is to restore the basic state of the organic fertilizer equipment;
(2) Strictly abide by the operating procedures, prevent and avoid destructive operations, and prevent and avoid overload operation: Most of the problems of organic fertilizer equipment are caused by improper operation or inadequate maintenance, and regulate the behavior of employees.
(3) Continuously discover, prevent and repair natural deterioration, so that organic fertilizer equipment can be repaired in the state of potential failure: the significance of self-maintenance is to find problems at the first time through the participation of front-line employees, and fully standardize production and maintenance.
(5) Prevent man-made deterioration, avoid man-made damage, and prevent destructive maintenance;
Finally, the good operation of the npk production line is closely related to the quality of the organic fertilizer equipment. The upgrading of the equipment must start from the production needs and production standards to ensure safety.
