The organic fertilizer granulator is an important equipment for the production of granular organic fertilizers such as npk production line, organic fertilizer production process, and bio organic fertilizer production. The organic fertilizer granulator consists of several parts. First, it's the collection part of the device. Secondly, it is the most important transmission component and also a bracket device with special technology. Finally, there are the conveyor belts and auxiliary wheels. In the future, maintaining the equipment is very important. The dust on the equipment needs to be cleaned in place to prevent dust from entering the inside of the machine. If the bearing temperature is too high, ginger tea is needed, and the parts need to be checked regularly to prevent excessive wear.
Possible reasons for the abnormality of the organic fertilizer granulator:
1. There may be a problem with the bearing of a certain part of the granulator, which makes the machine work abnormally, the working current fluctuates, and the working current is too high.
2. The ring die is blocked, or a part of the die hole is detached from the material. If the ring die enters the foreign body, the ring die is out of the circle, the gap between the roller and the die is too tight, the roller is worn or the roller bearing is damaged and cannot rotate, which will cause the vibration of the granulator.
3. The coupling correction is unbalanced, the height and height are deviated, the granulator vibrates, and the gear shaft oil seal is easily damaged.
4. The main shaft is not tightened, especially the D or E machine, the loosening of the main shaft will cause axial movement before and after the movement, the roller swings obviously, the granulator is noisy, and the granulation is difficult.
5. The wear of the big gear and the pinion, or the replacement of a single gear, will also produce a lot of noise.
6. The material discharge at the outlet of the conditioning device is uneven, which makes the working current of the granulator fluctuate greatly.
7. A new ring die must be used to prepare a new drum, and a certain proportion of sand chaff must be used for grinding and polishing.
8. The tail of the conditioner is not fixed or fixed and will not shake.
