The disc granulator machine is powered by a motor, which drives the inclined disc to rotate. The internal scraper prevents the material from sticking to the bottom of the disc. When the material rotates to the top, it rolls down by itself, rolling into granules like a snowball. Suitable for non-sticky powdery materials. The bottom of the disc organic fertilizer granulator is strengthened by multiple radiant steel plates, which is durable and permanently fixed. The organic fertilizer disc granulator is made of thickened, heavy, and solid base, no need for anchor bolts, and stable operation. The disc granulator machine is widely used and can be used in organic fertilizer production process, npk production line and bio organic fertilizer production, etc.
1. The disc is tilted too much. The most common problem encountered in the use of the disc granulator machine is the adjustment of the inclination angle. In fact, there are no specific parameters for your reference, but it should be based on the shape of spherical particles. The adjustment measure is to change the position and angle of the reducer by adjusting the bolts at the bottom of the disc, so as to achieve the purpose of normal use.
2. It is difficult to form. In addition to the subjective factors of the raw material composition, the spherical particles of the disc organic fertilizer granulator also include the fineness of the raw material, the moisture content of the raw material, the addition of auxiliary bonding ingredients, and the angle of the disc. Operation, the speed at which the disc runs, etc. These are also common problems we encounter. According to the reasons for the above problems, some improvements can be made to achieve our expected value.
3. The particles are uneven. This problem is a common problem in the single machine operation of the disc organic fertilizer granulator. The treatment of such problems is generally divided into two parts. One is to increase the moisture content, and the other is to control the size of the formed particles. We then narrow down our selection by sieving after drying.
4. Intermittent operation. Such failures of the disc granulator machine are generally caused by bearing damage, disc weight loss, abnormal motor voltage and other reasons. Tracking the problem and repairing it in time can quickly eliminate the operation failure of the disc granulator machine.
