Before installing the organic fertilizer double axis mixer, you need to pay attention to the following points to ensure the correct installation of the equipment and subsequent stable operation:

1. Foundation inspection and preparation: According to the plan and foundation drawings of the organic fertilizer equipment, check whether the dimensions of each installation foundation meet the requirements of the drawings. Ensure that the installation foundation is flat to avoid vibration of the equipment during operation due to uneven foundation.

2. Equipment inspection: Check whether the equipment is deformed, damaged or lost during transportation to ensure that each equipment is in good condition. Check whether all fasteners are firm, especially the anchor bolts or the fixing bolts of the bearing seat.

3. Lubrication and transmission system inspection: Check whether the reducer is added with lubricating oil before use to ensure that the V-belt is installed in place. Check whether the tension of the drive belt is appropriate to ensure that the motor shaft is parallel to the mixer shaft.

4. Trial run: After installation, perform a no-load test run to ensure that the equipment operates normally without abnormal sound or vibration. After the no-load test run is normal, perform a load test run to ensure that the equipment can also operate stably under load.

5. Safety and protection: Ensure that safety protection measures are in place during the installation and operation of the equipment to avoid safety accidents caused by equipment movement or improper operation. Provide necessary training to operators to ensure that they are familiar with the equipment's operating procedures and safety precautions.

Through the above steps, the correct installation and stable operation of the organic fertilizer twin-shaft mixer can be ensured, and production efficiency and equipment life can be improved.