1. Inspection

Before using the organic fertilizer crusher, it is necessary to check whether there is foreign matter in the mill to prevent damage to the mill. At the same time, it is also necessary to check whether the blade is fixed well to avoid vibration during work.

Second, boot

1. Before starting, it is necessary to check whether the chain, belt and other components around the organic fertilizer crusher are normal and whether there is loosening.

2. After starting, the organic fertilizer equipment should be idled for a period of time before starting to work without abnormal sound.

3. When the organic fertilizer grinder is working, it must be specially responsible for this work by one person, and it is forbidden to switch or maintain others at will.

Third, use precautions

1. It is forbidden to use the machine without loading the material.

2. When feeding, the material must be evenly fed into the feed port, and it is strictly prohibited to extend the hand or tool directly into the feed port.

3. If the organic fertilizer raw materials contain hard foreign bodies, which may cause damage to the machine, it is recommended to screen the materials in advance.

4. When the organic fertilizer crusher needs to be suspended, the power supply of the host must be turned off first, and then the residual materials must be cleaned up after the shutdown to ensure the normal operation of the machine before leaving.

5. If you encounter materials that cannot be handled, stop the machine immediately and notify professionals to deal with them.

Fourth, maintenance

1. Regularly clean the residual materials inside the machine to ensure the normal operation of the machine.

2. Check the blade wear regularly and replace it in time if it is seriously worn.

3. Regularly lubricate the machine to ensure the normal use of the organic fertilizer production line.