1. Installation and commissioning

(1) The loader feeding hopper should be placed on the flat ground when in use to make the whole machine stable and firm.

(2) Pay attention to the height before and after the feeder when placed, so as to facilitate the forklift to feed from the low end.

(3) When the organic fertilizer production line is used, the inverter can be added according to the need to adjust the discharge speed and control the flow.

2. Use and operation

(1) The machine should start the belt conveyor when preparing for work.

(2) When the material is put in, it is necessary to discharge the material slowly, and it is forbidden to cause damage to the organic fertilizer equipment by cutting the material too fast and too fast.

3. Precautions

(1) When the forklift is feeding, it is necessary to prevent hard foreign bodies or large materials from entering.

(2) After stopping the belt conveyor, the forklift shall not continue to feed, so as not to cause crushing of the belt conveyor.

(3) When the forklift is fed, it is strictly prohibited to lift the forklift bucket too high and then dump the material down sharply, which will cause the material to break the buffer net and cause the deformation of the buffer net